home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
RenderOrgan
/
(WIN+MAC) RenderOrgan
/
renderorgan
/
renderorgan.img
/
pc
/
743
/
743.ini
< prev
next >
Wrap
INI File
|
1995-10-20
|
13KB
|
296 lines
; --------------------------------------------------------------------
; Template DIRECTOR.INI file for Director 4.0 for Windows.
; --------------------------------------------------------------------
; All of the settings shown here are commented-out in the original version
; of the file. To change a setting, you must remove the comment
; character (";") at the beginning of the setting's line.
; The values shown for each setting in the original file are Director's
; internal defaults. The default value for a setting is used when it
; isn't explictly set in the .INI file or when no .INI file exists.
; Since these defaults are already stored internally in the Director
; application and projectors, it is *not* necessary to distribute this
; file with your movie unless you change one or more of the settings.
; For use with projectors, you must name your .INI file "<ProjectorName>.INI"
; rather than "DIRECTOR.INI" and place the file in the same directory as
; your projector executable.
[Memory]
ExtraMemory=7500
; Amount of kBytes over and above physical memory for use by a projector.
SwapFileMeg=0
; Amount of megabytes of SwapFile space to enable during authoring.
; Default is to allow swapfile space of up to 1/2 of the available
; physical RAM.
;
[Graphics]
Wing=0
; 0: Do not use WinG graphics accelerator.
; 1: Use WinG graphics accelerator software. This requires
; certain system files to be installed. Projector size and memory
; usage may increase. See the documentation for details.
[Palette]
Animation=1
; 1: allows director to take control of the palette for fast palette effects
; and transitions.
; 0: prevents director from taking control of the palette so other apps,
; wallpaper etc. look better but palette effects and transitions will
; be slower.
; Global Sound Settings ------------------------------------------------
[Sound]
; Settings in the [Sound] section apply to all sound cards.
SpoolBufferAlloc=0
; When to allocate spool buffers
; 0 means allocate/deallocate dynamically, when sound starts/stops.
; 1 means allocate spool once at startup and keep for entire session.
LowSpoolBufferMs=1000
; Length of one 8bit spool buffer, in milliseconds.
HighSpoolBufferMs=1000
; Length of one 16-bit spool buffer, in milliseconds.
SpoolBufferCount=2
; Number of spool buffers to use. Must range from 2 to 10.
MixMaxChannels=4
; Maximum number of channels supported by the sound mixer. The actual
; number you can mix depends on the processing power of your computer.
; Must range from 1 to 8.
;MixWaveDevice=0
; DeviceID of waveOut device to use for playing.
; Must range from 0 to (# of devices - 1).
;SoundLevel0=0 ; waveOut volume of lingo soundLevel = 0
;SoundLevel1=24770 ; waveOut volume of lingo soundLevel = 1
;SoundLevel2=35030 ; waveOut volume of lingo soundLevel = 2
;SoundLevel3=42903 ; waveOut volume of lingo soundLevel = 3
;SoundLevel4=49540 ; waveOut volume of lingo soundLevel = 4
;SoundLevel5=55388 ; waveOut volume of lingo soundLevel = 5
;SoundLevel6=60674 ; waveOut volume of lingo soundLevel = 6
;SoundLevel7=65535 ; waveOut volume of lingo soundLevel = 7
;MixMaxFidelity=99
; Sets a limit on the fidelity of sound output. For best performance, use
; the default setting of 99 (switch on-the-fly), or choose the lowest value
; possible of the three fixed sound formats (0, 1, 2):
; 0 = 22.05k samples/sec, 8-bit, mono
; 1 = 22.05k samples/sec, 8-bit, stereo
; 2 = 44.1k samples/sec, 16-bit, stereo
; 99 = Switch formats on-the-fly. The first sound in a run of overlapping
; sounds determines the format for that run. The format used is the
; lowest of the three output formats (0,1,2 above) which is as close
; as possible in fidelity to the sound to be played, while still being
; supported by the installed sound card.
; Default Sound Settings -----------------------------------------------
[Low Mono Default Sound]
; Settings in the [Low Mono Default Sound] section apply when the target
; output format is 22K, 8-bit, mono. The target output format depends
; on the capabilities of the sound card as well as the setting of
; MixMaxFidelity. These settings are used when the installed sound card
; is not known to Director and is not specified explictly in the
; the <SoundCardName> sections. Settings in the <SoundCardName> or
; Override sections will override these values for specific sound cards,
; or for all sound cards, respectively.
;MixBufferMs=200
; Length of each mixing buffer, in milliseconds.
;MixBufferBytes=0
; Length of each mixing buffer, in bytes. Setting this value to non-0,
; along with setting MixBufferMs=0, lets you specify the buffer size in
; bytes rather than milliseconds.
;MixBufferCount=4
; Number of mixing buffers to use. Must range from 2 to 16.
;MixServiceMode=0
; 0 means use timer interrupts to drive mixer. Interrupt settings will be
; applied from MixIntPeriodMs and MixIntResolutionMs.
; 1 means use polling to drive mixer. This may cause sound to drop out when
; CPU cycles are being hogged by other tasks, disk accesses, etc.
; 2 means use the waveOut buffer-completion callback to drive mixer. If
; this mode is set, it is best to use MixBufferBytes to specify a
; fixed buffer size which is a multiple of 1024. This mode is not
; supported by all sound cards.
;MixIntPeriodMs=200
; Interrupt period, in milliseconds. Only used when MixServiceMode is zero.
;MixIntResolutionMs=50
; Interrupt resolution, in milliseconds. Only used when MixServiceMode is zero.
[Low Default Sound]
; Settings in the [Low Default Sound] section apply when the target
; output format is 22K, 8-bit, stereo. The target output format depends
; on the capabilities of the sound card as well as the setting of
; MixMaxFidelity. These settings are used when the installed sound card
; is not known to Director and is not specified explictly in the
; the <SoundCardName> sections. Settings in the <SoundCardName> or
; Override sections will override these values for specific sound cards,
; or for all sound cards, respectively.
;MixBufferMs=200
;MixBufferBytes=0
;MixBufferCount=4
;MixServiceMode=0
;MixIntPeriodMs=200
;MixIntResolutionMs=50
[High Default Sound]
; Settings in the [High Default Sound] section apply when the target
; output format is 44K, 16-bit, stereo. The target output format depends
; on the capabilities of the sound card as well as the setting of
; MixMaxFidelity. These settings are used when the installed sound card
; is not known to Director and is not specified explictly in the
; the <SoundCardName> sections. Settings in the <SoundCardName> or
; Override sections will override these values for specific sound cards,
; or for all sound cards, respectively.
;MixBufferMs=200
;MixBufferBytes=0
;MixBufferCount=4
;MixServiceMode=0
;MixIntPeriodMs=200
;MixIntResolutionMs=50
; Sound Card-Specific Settings -----------------------------------------
;[Low Mono <SoundCardName>]
; Settings in this section apply when the target output format is
; 22K 8-bit mono, and you're using a particular sound card. The target
; output format depends on the capabilities of the sound card, as well
; as the setting of MixMaxFidelity. You can have any number of these
; sections. Replace "<SoundCardName>" (including the angled brackets)
; with the actual name of the sound card you want to set defaults for.
; To find the name of your card, launch the Sound Mapper application,
; and look in the Playback field. Director maintains a built-in table
; of settings for many popular sound cards. Settings in this section take
; precedence over Director's built-in settings.
;MixBufferMs=200
;MixBufferCount=4
;MixBufferBytes=0
;MixServiceMode=0
;MixIntPeriodMs=200
;MixIntResolutionMs=50
[Low <SoundCardName>]
; Settings in this section apply when the target output format is
; 22K 8-bit stereo, and you're using a particular sound card. The target
; output format depends on the capabilities of the sound card, as well
; as the setting of MixMaxFidelity. You can have any number of these
; sections. Replace "<SoundCardName>" (including the angled brackets)
; with the actual name of the sound card you want to set defaults for.
; To find the name of your card, launch the Sound Mapper application,
; and look in the Playback field. Director maintains a built-in table
; of settings for many popular sound cards. Settings in this section take
; precedence over Director's built-in settings.
;MixBufferMs=200
;MixBufferCount=4
;MixBufferBytes=0
;MixServiceMode=0
;MixIntPeriodMs=200
;MixIntResolutionMs=50
;[High <SoundCardName>]
; Settings in this section apply when the target output format is
; 44K 16-bit stereo, and you're using a particular sound card. The target
; output format depends on the capabilities of the sound card, as well
; as the setting of MixMaxFidelity. You can have any number of these
; sections. Replace "<SoundCardName>" (including the angled brackets)
; with the actual name of the sound card you want to set defaults for.
; To find the name of your card, launch the Sound Mapper application,
; and look in the Playback field. Director maintains a built-in table
; of settings for many popular sound cards. Settings in this section take
; precedence over Director's built-in settings.
;MixBufferMs=200
;MixBufferBytes=0
;MixBufferCount=4
;MixServiceMode=0
;MixIntPeriodMs=200
;MixIntResolutionMs=50
; Sound Override Settings ----------------------------------------------
[Low Mono Override]
; Settings in the [Low Mono Override] apply when the target ouput format
; is 22K 8-bit mono. The target output format depends on the capabilities
; of the sound card, as well as the setting of MixMaxFidelity.
; These settings will override Director's internal settings, any defaults
; specified in the Default Sound sections, as well as settings for specific
; cards. Change these settings only if you want to force Director to use
; certain values regardless of the sound card installed in the computer.
; It is not recommended that you modify these settings for movies which
; you are going to distribute, as they will override Director's internal
; settings which are already optimized for various sound cards.
;MixBufferMs=200
;MixBufferBytes=0
;MixBufferCount=4
;MixServiceMode=0
;MixIntPeriodMs=200
;MixIntResolutionMs=50
[Low Override]
; Settings in the [Low Override] apply when the target ouput format
; is 22K 8-bit stereo. The target output format depends on the capabilities
; of the sound card, as well as the setting of MixMaxFidelity.
; These settings will override Director's internal settings, any defaults
; specified in the Default Sound sections, as well as settings for specific
; cards. Change these settings only if you want to force Director to use
; certain values regardless of the sound card installed in the computer.
; It is not recommended that you modify these settings for movies which
; you are going to distribute, as they will override Director's internal
; settings which are already optimized for various sound cards.
;MixBufferMs=200
;MixBufferBytes=0
;MixBufferCount=4
;MixServiceMode=0
;MixIntPeriodMs=200
;MixIntResolutionMs=50
[High Override]
; Settings in the [High Override] apply when the target ouput format
; is 44K 16-bit stereo. The target output format depends on the capabilities
; of the sound card, as well as the setting of MixMaxFidelity.
; These settings will override Director's internal settings, any defaults
; specified in the Default Sound sections, as well as settings for specific
; cards. Change these settings only if you want to force Director to use
; certain values regardless of the sound card installed in the computer.
; It is not recommended that you modify these settings for movies which
; you are going to distribute, as they will override Director's internal
; settings which are already optimized for various sound cards.
;MixBufferMs=200
;MixBufferBytes=0
;MixBufferCount=4
;MixServiceMode=0
;MixIntPeriodMs=200
;MixIntResolutionMs=50